Katana VentraIP

Helical scan

Helical scan is a method of recording high-frequency signals on magnetic tape, used in open-reel video tape recorders, video cassette recorders, digital audio tape recorders, and some computer tape drives.

Media type

magnetic tape

recording high-frequency signals

With this technique, magnetic tape heads (or head chips) are placed on a rotating head drum.[1] which run the chips at high speed (or angular velocity). The tape is wrapped tightly around the drum. Either the drum[2] and/or the tape is tilted at an angle that allows the head chips to read the tape diagonally faster, so the linear speed of the tape may be slower than the speed of the head chips, which rotate at a higher speed allowing signals to be transmitted. high frequency, such as video, are recorded.[3][4][5] The diagonal tracks read or written using this method are known as helical tracks.[2]

Alpha wrap (α), in which the tape is wrapped around the drum in a full, fashion.[6][7]

360 degree

Omega wrap (Ω), in which the tape is wrapped almost fully around the drum similar to the Greek letter Omega. Used in recorders. The tape is wrapped 346 degrees around the drum with 270 degrees used for recording. Because of this, the vertical blanking interval of the video signal is lost and to prevent this a secondary head in a "1 1/2 head" configuration must record the interval when the video head is not reading the tape. A full frame or field of video can be recorded in a single revolution of the drum with a single head creating a single diagonal track on the tape.[8][9][10][11]

Type-C videotape

C wrap, where the tape is wrapped around the head drum in the shape of a backwards C, used in the format, uses a wrap of 200 to 300 degrees where 180 to 270 degrees are active or used for recording, similar to the U wrap which is reminiscent of an U laid on its side and is used in the U-matic format. Because the tape is not wrapped around the drum as much as with the omega wrap, two heads creating two diagonal tracks must be used to record a video frame, one field for every track and head. [12][13][10][14]

Betacam

M wrap, used in and the D-1 (Sony) and D-2 (video) digital videotape formats, wraps the tape around the head drum in a pattern or in a tape path reminiscent of the letter M, around the left and right side of the head drum, 250 to 300 degrees around it where 180 to 270 degrees are active or used for recording, with two heads if 180 degrees are used.[15][16][10][17]

VHS

Half wrap, used to denominate any type of wrap where the tape covers approximately 180 degrees, or half of the circumference of the drum. To record a full frame of video it requires at least two video heads, each sharing a video field.[19]

[18]

There are several types of helical scan. These include:


Many helical scan cassette formats such as VHS and Betacam use a head drum with heads that use azimuth recording, in which the heads in the head drum have a gap that is tilted at an angle, and opposing heads have their gaps tilted so as to oppose each other.[20][21] This eliminates the need for guard bands between the helical tracks allowing for a higher density of information on the tape.[22][23][24]

History[edit]

Earl Edgar Masterson from RCA patented the first helical scan method in 1950.[25][26] German engineer Eduard Schüller developed a helical scan method of recording in 1953 while working at AEG.[27][28] With the advent of television broadcasting in Japan in the early 1950s, they saw the need for magnetic television signal recording. Dr. Kenichi Sawazaki developed a prototype helical scan recorder in 1954.[29] Helical scan machines were demonstrated by Toshiba in 1959 and since they recorded one field of video per track, they were the first to allow video to be paused and played back at speeds other than real time. Helical scan type B and type C videotape began to be used in 1976.[30]

Type B videotape video scanner head

Type B videotape video scanner head

Rotary head visible in a VXA computer tape drive

Rotary head visible in a VXA computer tape drive

VXA tape drive, alternate view of rotary head and loading mechanism

VXA tape drive, alternate view of rotary head and loading mechanism

Type A videotape

1 inch type B videotape

1 inch type C videotape

about the IVC 2-inch helical VTR, Model 9000

IVC videotape format

(VTR)

Video tape recorder

Vision Electronic Recording Apparatus

Ampex 2 inch helical VTR

Symmetric Phase Recording

filed 1971.

Sony U.S. patent for U-matic videotape cassette

filed 1971.

Sony U.S. patent for design of U-matic deck

video preservation and conservation museum

The history of television, 1942 to 2000 By Albert Abramson, page 93.

in the Experimental TV Center

Ampex page