Industrial applications[edit]
Polar codes have some limitations when used in industrial applications. Primarily, the original design of the polar codes achieves capacity when block sizes are asymptotically large with a successive cancellation decoder. However, with the block sizes used in industry, the performance of the successive cancellation is poor compared to well-defined and implemented coding schemes such as low-density parity-check code (LDPC) and turbo code. Polar performance can be improved with successive cancellation list decoding, but its usability in real applications is still questionable due to very poor implementation efficiencies caused by the iterative approach.[3]
In October 2016, Huawei announced that it had achieved 27 Gbit/s in 5G field trial tests using polar codes for channel coding. The improvements have been introduced so that the channel performance has now almost closed the gap to the Shannon limit, which sets the bar for the maximum rate for a given bandwidth and a given noise level.[4]
In November 2016, 3GPP agreed to adopt polar codes for the eMBB (Enhanced Mobile Broadband) control channels for the 5G NR (New Radio) interface. At the same meeting, 3GPP agreed to use LDPC for the corresponding data channel.[5]
PAC code[edit]
In 2020, Arıkan introduced a novel polar coding method dubbed polarization-adjusted convolutional (PAC) codes. At short blocklengths, such codes outperform both convolutional codes and CRC-aided list decoding of conventional polar codes.[6][7]