Katana VentraIP

Scale length (string instruments)

The scale length of a string instrument is the maximum vibrating length of the strings that produce sound, and determines the range of tones that string can produce at a given tension. It is also called string length. On instruments in which strings are not "stopped" (typically by frets or the player's fingers) or divided in length (such as in the piano), it is the actual length of string between the nut and the bridge.

For the musical (rather than instrumental) scale, see Pythagorean tuning.

String instruments produce sound through the vibration of their strings. The range of tones these strings can produce is determined by three primary factors: the linear density of the string, that is its mass per unit length (which is determined by its thickness and the density of the material), the tension placed upon it, and the instrument's scale length.


Generally, a string instrument has all strings approximately the same length, so the scale length can be expressed as a single measurement, e.g., the violin and most guitars.

Bowed strings[edit]

Violin family[edit]

The two most famous violin makers, Antonio Stradivari (1644–1737) and Giuseppe Guarneri del Gesù (1698–1744), both used an open string length of 12.8 inches (330 mm) for their violins, which had already been established a generation before by Jacob Stainer (c. 1617–1683). Later makers have been unwilling to deviate from this. (There was variance in scale length in the earliest violins, and almost all of those in current use have had the necks replaced, with the original scroll grafted, so statements of consistent scale length during that time is somewhat speculative.)


Smaller scale instruments are used extensively to teach younger players. The size of these is described by a "conventional" fraction that has no mathematical significance. For example, a 7/8 violin has a scale of about 317 mm, a 3/4-size instrument a scale of 307 mm, a half-size one 287 mm, and a quarter-size one 267 mm. 1/8, 1/10, 1/16 and 1/32 and even 1/64 violins also exist, becoming progressively smaller, but again in no proportional relationship. (A full-size instrument is described as 4/4.)


Cellos exist in a smaller range of sizes than violins, with 4/4, 3/4, 1/2, 1/4, 1/8, and 1/10 being reasonably common. As with the violin, the Stradivarius scale is regarded as standard for orchestral work; This is about 27.4 inches (700 mm).


Violas are commonly described in terms of their body length rather than by a fraction. There are two reasons for this. First, unlike that of the violin and the cello, the viola scale length has not standardised, but rather advanced players use whatever scale length best suits them. Secondly, student sizes are not as often required, as most viola players who start learning at a young age start on the violin. Common sizes include 17 inches (430 mm), 16+12 inches (420 mm), 16 inches (410 mm), 15+12 inches (390 mm), 15 inches (380 mm), 14 inches (360 mm), and less commonly 12 inches (300 mm), smaller than a standard violin; These measurements are nominal and approximate. At least one of the surviving Stradivarius violas has a scale length of 14+14 inches (360 mm).

Double bass[edit]

There is some variation in the scale length of an orchestral double bass, generally in the range 41.3–43.3 inches (1,050–1,100 mm). There are also smaller versions of this "full scale" double bass with the same scale length but with a smaller sound box, intended for other musical idioms. Smaller scale instruments are also quite commonly used by fully-grown players in jazz, folk music and similar ensembles.


The system of conventional fractions is taken to its logical conclusion with string bass sizes, in that a full-size (4/4) bass is uncommon. Most basses are 3/4 or 7/8, and younger players can use 1/2 or even 1/4 size instruments.

Guitars[edit]

Classical guitar[edit]

Like that of the violin, the scale of the classical guitar was standardized by the work of its most famous maker. Antonio De Torres (1817–1892) used a scale length of 25.6 inches (650 mm), and later makers have followed suit. However, from the mid- 20th Century luthiers seeking increased volume have moved to a 26 inches (660 mm) scale, which is now the standard for such leading makers as Ramirez.

Steel-string acoustic guitar[edit]

The steel-string acoustic guitar typically has a scale slightly shorter than the classical instrument, the most common scales ranging between short scale (24 inches (610 mm)) and long scale (25.5 inches (650 mm)). Small travel guitars and guitars specifically designed for children can have even shorter scales. For example, a 3/4 size steel string guitar might have a scale length of 23 inches (580 mm).

Electric guitar[edit]

Electric guitars reflect the range of scale lengths found with steel-string acoustics. With regard to tone, a longer scale favors "brightness" or cleaner overtones and more separated harmonics versus a shorter scales, which favors "warmth" or more muddy overtones. According to Dave Hunter's Tone Manual (2011), each scale length has its characteristic sound and tone, which is individual from other sounds in the tone chain: strings, pickups, pedals, amplifiers, speakers, and cabinets.


Most Fender electric guitars, including the Telecaster, Stratocaster, and Jazzmaster, use a scale length of 25.5 inches (650 mm). A few Fender models such as the Jaguar and Mustang, which was introduced as a student model, use a scale length of 24 inches (610 mm). Fender has also built some 3/4-size student guitars with a scale length of 22.5 inches (570 mm) or shorter.


Gibson uses a scale length of 24+34 inches (630 mm) on most of its electric guitars, including the ES-335, Les Paul, SG, Flying V, and Explorer. Gibson has used other scale lengths on various models through the years. Gibson's nominal "24.75" in scale length has itself varied, sometimes measuring 24+58 or 24+916 inches (625 or 624 mm) depending on the production equipment used.[1] As Gibson necks are not typically interchangeable, this usually goes unnoticed in practice.

Bass guitar[edit]

The first electric basses were upright electric basses built in the 1930s by fitting an otherwise normal double bass with electric pickups, and so had a scale length of about 43 in (1,100 mm). When the electric bass guitar was popularized by the release in 1951 of the Fender Precision Bass, its shorter scale length of 34 in (860 mm) was established as the standard scale length for a bass guitar. An instrument with a scale of 30 in (760 mm) or less is considered "short scale". A "medium scale" of 32 in (810 mm), halfway between the two, also exists, but is less common.

: 13-14 in (33-35.6 cm). Classical bowlback mandolins are often 13 in. (same as violin), Gibson mandolins (and many others that follow Gibson) are 13.875 in. Some manufacturers, such as Weber, use 14 in.

Mandolin

: 16.5 in (42 cm)

Mandola

: 22.75 in (58 cm)

Octave mandolin

27 in (686 mm)

Mandocello

The Model D, at 8 feet 11+34 inches (273.7 cm).

Steinway

The , at 9 feet 6 inches (290 cm) with 97 keys.

Imperial Bösendorfer

The F308 at 10 feet 2 inches (310 cm).

Fazioli

Fingerboard

Multi-scale fingerboard

by R.M. Mottola, on the Liutaio Mottola Lutherie Information Website.

"Lutherie Info – Measuring Scale Length of Stringed Instruments"

"Fender's 3/4 Scale Guitars", a two-part article by Tim Pershing in magazine, December 1996 and January 1997.

20th Century Guitar

gives some scale lengths.

Instrument plans index

- discussion of the effect of scale length.

scale lengths

discusses scale length.

Bass guitar buying guide

with dimensions.

Vintage guitars

giving both body and scale lengths.

Listing of some orchestral basses

Real Guitar Solo

Road Toad Music's UBass Page