Pickelhaube

The Pickelhaube (German: [ˈpɪkl̩ˌhaʊ̯bə] ^ⓘ; pl. Pickelhauben, pronounced [ˈpɪkl̩ˌhaʊ̯bn̩] ^ⓘ; from German: Pickel, lit. 'point' or 'pickaxe', and Haube, lit. 'bonnet', a general word for "headgear"), also Pickelhelm, is a spiked leather or metal helmet that was worn in the 19th and 20th centuries by Prussian and German soldiers of all ranks, firefighters and police. Although it is typically associated with the Prussian Army, which adopted it in 1842–43,^[1] the helmet was widely imitated by other armies during that period.^[2] It is still worn today as part of ceremonial wear in the militaries of certain countries, such as Sweden, Chile, and Colombia.

Design[edit]

The basic Pickelhaube was made of hardened (boiled) leather, given a glossy-black finish, and reinforced with metal trim (usually plated with gold or silver for officers) that included a metal spike at the crown. Early versions had a high crown, but the height gradually was reduced and the helmet became more fitted in form, in a continuing process of weight-reduction and cost-saving. In 1867, a further attempt at weight reduction by removing the metal binding of the front peak, and the metal reinforcing band on the rear of the crown (which also concealed the stitched rear seam of the leather crown), did not prove successful.

The version of the Pickelhaube worn by Prussian artillery units employed a ball-shaped finial rather than the pointed spike, a modification ordered in 1844 because of injuries to horses and damage to equipment caused by the latter.^[12] Prior to the outbreak of World War I in 1914 detachable black or white plumes were worn with the Pickelhaube in full dress by German generals, staff officers, dragoon regiments, infantry of the Prussian Guard and a number of line infantry regiments as a special distinction. This was achieved by unscrewing the spike (a feature of all Pickelhauben regardless of whether they bore a plume) and replacing it with a tall metal plume-holder known as a trichter. For musicians of these units, and also for Bavarian Artillery and an entire cavalry regiment of the Saxon Guard, this plume was red.

Aside from the spike finial, perhaps the most recognizable feature of the Pickelhaube was the ornamental front plate, which denoted the regiment's province or state. The most common plate design consisted of a large, spread-winged eagle, the emblem used by Prussia. Different plate designs were used by Bavaria, Württemberg, Baden, and the other German states. The Russians used the traditional double-headed eagle.

German military Pickelhauben also mounted two round, colored cockades behind the chinstraps attached to the sides of the helmet. The right cockade, the national cockade, was red, black and white. The left cockade was used to denote the state of the soldier (Prussia: black and white; Bavaria: white and blue; etc.).

All-metal versions of the Pickelhaube were worn mainly by cuirassiers, and often appear in portraits of high-ranking military and political figures (such as Otto von Bismarck, pictured above). These helmets were sometimes referred to as lobster-tail helmets, due to their distinctive articulated neck guard. The design of these is based on cavalry helmets in common use since the 16th century, but with some features taken from the leather helmets. The version worn by the Prussian Gardes du Corps was of tombac (copper and zinc alloy) with silver mountings. That worn by the cuirassiers of the line since 1842 was of polished steel with brass mountings.

Kaiser Wilhelm II, August von Mackensen and others wearing Pickelhauben with cloth covers in 1915

The Pickelhaube was often used in propaganda against the Germans as in this World War I poster (Harry R. Hopps; 1917).

All helmets produced for the infantry before and during 1914 were made of leather. As the war progressed, Germany's leather stockpiles dwindled. After extensive imports from South America, particularly Argentina, the German government began producing ersatz Pickelhauben made of other materials. In 1915, some Pickelhauben started to be constructed from thin sheet steel. However, the German high command needed to produce an even greater number of helmets, leading to the usage of pressurized felt and even paper to construct Pickelhauben. The Pickelhaube was discontinued in 1916.^[14]

During the early months of World War I, it was soon discovered that the Pickelhaube did not measure up to the demanding conditions of trench warfare. The leather helmets offered little protection against shell fragments and shrapnel and the conspicuous spike made its wearer a target. These shortcomings, combined with material shortages, led to the introduction of the simplified model 1915 helmet described above, with a detachable spike. In September 1915 it was ordered that the new helmets were to be worn without spikes when in the front line.^[15]

Beginning in 1916, the Pickelhaube was slowly replaced by a new German steel helmet (the Stahlhelm) intended to offer greater head protection from shell fragments. After the adoption of the Stahlhelm, the Pickelhaube was reduced to limited ceremonial wear by senior officers away from the war zones; plus the Leibgendarmerie S.M. des Kaisers whose role as an Imperial/Royal escort led them to retain peacetime full dress throughout the war.^[16]^[17] With the collapse of the German Empire in 1918, the Pickelhaube ceased to be part of the military uniform, and even the police adopted shakos of a Jäger style. In modified forms the new Stahlhelm helmet would continue to be worn by German troops into World War II.

Cultural icon[edit]

As early as 1844, the poet Heinrich Heine mocked the Pickelhaube as a symbol of reaction and an unsuitable head-dress. He cautioned that the spike could easily "draw modern lightnings down on your romantic head".^[18] The poem was part of his political satire on the contemporary monarchy, national chauvinism, and militarism, used aggressively against democratic movements, entitled Germany. A Winter's Tale.

In the lead-up to the 2006 FIFA World Cup in Germany, a molded plastic version of the Pickelhaube was available as a fanware article. The common model was colored in the black-red-gold of the German flag, with a variety of other colors also available.

The spiked helmet remained part of a clichéd mental picture of Imperial Germany as late as the inter-war period even after the headdress had ceased to be worn. This was possibly because of the extensive use of the pickelhaube in Allied propaganda before and during World War I, although the helmet had been a well known icon of Imperial Germany even prior to 1914. Pickelhauben were popular targets for Allied souvenir hunters during the early months of the war.^[19]